Attaching Face Frames - Kreg Owners' Community2024-03-29T08:41:47Zhttps://kregjig.ning.com/forum/topics/attaching-face-frames?commentId=2900167%3AComment%3A16217&feed=yes&xn_auth=noIf your cabinets are all put…tag:kregjig.ning.com,2010-01-26:2900167:Comment:162172010-01-26T17:31:45.217ZHenry Parslowhttps://kregjig.ning.com/profile/HenryParslow
If your cabinets are all put together you may have to use an angle drill attachment depending on the size of your drill and depth of the cabinet. a kreg drill bit attached to a regular drill is far to long for wall cabinets. When you do more cabinets make sure you pre-drill before assembly. Also make sure that the face frame is securely clamped when you attach because it may move.
If your cabinets are all put together you may have to use an angle drill attachment depending on the size of your drill and depth of the cabinet. a kreg drill bit attached to a regular drill is far to long for wall cabinets. When you do more cabinets make sure you pre-drill before assembly. Also make sure that the face frame is securely clamped when you attach because it may move. You need to drill pocketholes…tag:kregjig.ning.com,2010-01-26:2900167:Comment:161212010-01-26T15:56:09.121ZJonathan Gelaudehttps://kregjig.ning.com/profile/JonathanGelaude
You need to drill pocketholes inside the front edge of the cabinet, facing the front of the cabinet. Then secure your faceframe onto the front of the cabinet. If you have the Kreg 90-degree clamp, this would be a perfect use for it. Then use the correct length of screws from within the cabinet, in the holes you just drilled. Make sure the face frame is securely in place before doing this. The pockethole screws will pull the faceframe tightly against the cabinet edge as you screw them in. That…
You need to drill pocketholes inside the front edge of the cabinet, facing the front of the cabinet. Then secure your faceframe onto the front of the cabinet. If you have the Kreg 90-degree clamp, this would be a perfect use for it. Then use the correct length of screws from within the cabinet, in the holes you just drilled. Make sure the face frame is securely in place before doing this. The pockethole screws will pull the faceframe tightly against the cabinet edge as you screw them in. That should do it.