Kreg Owners' Community

I am building some shop cabinets as practice and I can't figure out how to attach the face frames using the Kreg system. Building the carcass and drawers is really easy. Any advice on how to attach theface frames would be greatly appreciated.

Views: 1064

Reply to This

Replies to This Discussion

You need to drill pocketholes inside the front edge of the cabinet, facing the front of the cabinet. Then secure your faceframe onto the front of the cabinet. If you have the Kreg 90-degree clamp, this would be a perfect use for it. Then use the correct length of screws from within the cabinet, in the holes you just drilled. Make sure the face frame is securely in place before doing this. The pockethole screws will pull the faceframe tightly against the cabinet edge as you screw them in. That should do it.
If your cabinets are all put together you may have to use an angle drill attachment depending on the size of your drill and depth of the cabinet. a kreg drill bit attached to a regular drill is far to long for wall cabinets. When you do more cabinets make sure you pre-drill before assembly. Also make sure that the face frame is securely clamped when you attach because it may move.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

Videos

  • Add Videos
  • View All

Forum

Back with Kreg 3 Replies

After being disappointed with my Kreg Foreman I sold it and got a Porter Cable 560. It was a decent jig and performed with decent results. Then a friend who is also a Kreg dealer told me about the K5.i bought one and set it up. I must say it's…Continue

Started by DaveTinley in Beginners' Zone. Last reply by KregCS on Wednesday.

spam 3 Replies

Did anybody get bs email from Timothy White about Your surname? He said he got my name from here.Continue

Started by Timothy Spoon in Beginners' Zone. Last reply by KregRep Apr 4.

Product Reviews

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_