Kreg Owners' Community

Just wondering if someone can  give a review on it and the drawer mounting bracket. I've been looking on here for a video about it, just can't find one. not even on kreg under U tube.

Views: 2994

Reply to This

Replies to This Discussion

I just bought it and plan to use it soon.

I'll let you know how well it works.

 

I received this for Christmas and love them.  They hold the bracket right where it belongs and makes everything easier.  It truly provide the extra hands to speed up the process!!
Thank you, just curious how well they work.

Hillary Devere said:

I just bought it and plan to use it soon.

I'll let you know how well it works.

 

Thanks Tom, I wish they would put a video in the how to section to show the process. I'm glad you like it !!!
I will have to try it.... Thanks
Tom Pynaker said:
I received this for Christmas and love them.  They hold the bracket right where it belongs and makes everything easier.  It truly provide the extra hands to speed up the process!!

I found some video's on You Tube on how to use the Kreg Beaded Face Frame system.

http://www.youtube.com/watch?v=gX8NzOTnNfM

 

and

http://www.youtube.com/watch?v=8CwV7TBqZD4

 

Hi Leon - Here's some reviews, dunno about videos

http://www.amazon.com/Kreg-NZ03-Magnetic-Drawer-Mounting/dp/B0002QZ...

I used my drawer slide jig in my recent kitchen project, set the slide in the jig clamp it in place,drill the holes and drive the screws, that's it your done.

this simple little tool saved me so much time and agrevation that it was more then well worth the price

 

works fantastic, it is  a third hand to help with accuracy Once you use it, you won't go without it

Hi Leon.

I know it's kinda late but I found these.

 

 http://http://www.youtube.com/watch?v=vI3jgkhxxPE

 

and http://www.youtube.com/watch?v=F1Umr-CijW4&NR=1

 

Bit of an interesting twist.

 

Rick



Thanks everyone for the replies, I have not been on here in a while, I bought the set and they work great!  Again Thank You....

Rick said:

Hi Leon.

I know it's kinda late but I found these.

 

 http://http://www.youtube.com/watch?v=vI3jgkhxxPE

 

and http://www.youtube.com/watch?v=F1Umr-CijW4&NR=1

 

Bit of an interesting twist.

 

Rick



All the pictures and demos which I have seen using the Kreg Drawer Slide Mounting Tool and the Kreg Drawer Slide Mounting Brackets show face frame cabinet drawers which have metal slides at the bottom of the side of the drawer.  I am planning on using Accuride #3732 slides which mount on the side of the drawers with the center of the holes in the slide 1-1/2" up from the top of the rail.   

Does the Kreg Drawer Slide Mounting Tool work for that type of slide?

Also, do the Kreg Drawer Slide Mounting Brackets work for that type of slide?

Hi Don't know about the mounting tool. The brackets should work with any slide as they just clamp on the face frame and the drawer sits on them while the slides are attached to the drawer. The slides are mounted inside the cabinet first.

http://www.rockler.com/product.cfm?page=11298

Richard Sands said:

All the pictures and demos which I have seen using the Kreg Drawer Slide Mounting Tool and the Kreg Drawer Slide Mounting Brackets show face frame cabinet drawers which have metal slides at the bottom of the side of the drawer.  I am planning on using Accuride #3732 slides which mount on the side of the drawers with the center of the holes in the slide 1-1/2" up from the top of the rail.   

Does the Kreg Drawer Slide Mounting Tool work for that type of slide?

Also, do the Kreg Drawer Slide Mounting Brackets work for that type of slide?

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_