Kreg Owners' Community

I checked with my Lowes and they have 8 on order haven't gotten any yet.

Views: 9746

Reply to This

Replies to This Discussion

When I ripped the sheet of plywood I made 3 cuts of 6". On the 2nd and 3rd cuts I had no pressure on the ripcut be cause I thought I might be causing the wobble. In fact on the 3rd cut I let go of the ripcut about 6" before the end of the cut.



Bill Everett said:

When I ripped the sheet of plywood I made 3 cuts of 6". On the 2nd and 3rd cuts I had no pressure on the ripcut be cause I thought I might be causing the wobble. In fact on the 3rd cut I let go of the ripcut about 6" before the end of the cut.

Did you still have that uneven edge at the last bit of the cut?

Yes I had the wobble an all 3 cuts

dbest1a said:



Bill Everett said:

When I ripped the sheet of plywood I made 3 cuts of 6". On the 2nd and 3rd cuts I had no pressure on the ripcut be cause I thought I might be causing the wobble. In fact on the 3rd cut I let go of the ripcut about 6" before the end of the cut.

Did you still have that uneven edge at the last bit of the cut?

Can anyone tell me where I can get a rip- cut in Ontario Canada?

i live in canada in quebec  still trying to find one myself i ask busy bee tools and still have not got them in canada yet
  lee valley tools have got them  also so am on waiting list me too good luck and if you get any news let me know please.
Trevor Gilbert said:

Can anyone tell me where I can get a rip- cut in Ontario Canada?

Any way to get a "true" cut using the rip-cut?

Seems like everyone that has the rip cut has problems, or they are not talking.

I did a search and came up with one in Leamington ON.

http://www.thetoolstore.ca/view.asp?Kreg-KMA2675-Rip-Cut-Circular-S...

hope this helps

Trevor Gilbert said:

Can anyone tell me where I can get a rip- cut in Ontario Canada?

I WENT ON AMAZON AND IT WAS $28.95 AND NO SHIPPING OR TAX.  IT WILL BE HERE THIS WEEK.

Such is life on the internet. Most people are probably just using them normally. The only ones who come back are the ones who had a problem. ;)

Michael Garrett said:

Seems like everyone that has the rip cut has problems, or they are not talking.

Yes I think you could fix the problem by taking and mounting a sacrficial fence on the surface of the plywood your using to suport your material your cutting. It would have to be mounted 90 degress to the cut then line up the plywood edge which the guide will follow. Its also a good idea to clamp the material being cut to the suport material away from the guide end. I will try to build . The fence would probably be made of 3/8 inch plywood since it could not be any higher than the plywood being cut. You could not cut anything much thinner that.
Brian said:

Any way to get a "true" cut using the rip-cut?

I was thinking the plastic guide could be made longer giving you more stability thru the cut.  I'd probably have to fashion something a little longer, say 18 or 24 inches, providing leverage on the back end of the cut.

Gary roofner said:

Yes I think you could fix the problem by taking and mounting a sacrficial fence on the surface of the plywood your using to suport your material your cutting. It would have to be mounted 90 degress to the cut then line up the plywood edge which the guide will follow. Its also a good idea to clamp the material being cut to the suport material away from the guide end. I will try to build . The fence would probably be made of 3/8 inch plywood since it could not be any higher than the plywood being cut. You could not cut anything much thinner that.
Brian said:

Any way to get a "true" cut using the rip-cut?

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

French cleats 101 advice please

Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS  (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL.  after years of waiting…Continue

Tags: Unklejon, french, Cleats

Started by John Hoskison in General Woodworking May 27.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_