Kreg Owners' Community


What I want to do is take my Roybi chopsaw rail and add wheels. It's the tubular leg type mounted an angle like a sawhorse.  Reason I'm asking is Harbor Freight has there 10' tube tires for $3.99 .  I want setup such that only two wheels on one side and the wheels are not supporting the tool when in use. When you want to move it you lift the others and have wheel barrow effect to move. 

Views: 256

Reply to This

Replies to This Discussion

Hi Gary - I see what you are wanting to do. I think you are going to need to shorten two of the legs and install the wheels such that they support that side of the stand and the legs support the other side. Otherwise, you will need to lift it high enough to get all 4 legs off the floor. How high you will need to lift depends on how far outboard you mount the wheels. The farther outboard, the less you need to lift.

Here is another, more expensive, way to go:

my port-a-mate is like that.  when you pick up on one end, you can roll it on the wheels that came with it.  I just wish they were a little larger so it rolled easier.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 


  • Add Videos
  • View All



No Description

Started by Joe in Beginners' Zone 20 hours ago.

First time I really had a need for the ACS miter guide.

I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue

Tags: ACS

Started by Adam in General Woodworking May 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service