Kreg Owners' Community

Anyone care to take a guess at what I'm building now? (And no, you can't just say a box with two holes in it. lol)


Views: 866

Reply to This

Replies to This Discussion

A speaker stand? Maybe the holes are for the wires, etc.?
Bird house for BIG birds and SMALL birds hahah
Well you have already conquered woodburning, tin punch, and boat building. So I would guess the next thing in line would be something that involved knitting! LOL
It holds balls of yarn letting it dispense out the holes on either end?
Just kidding. Give us a hint. What room is it for?
Kim's hint: the music room.
It's a LAMP!!! :)
I was leaning toward a speaker that goes on a stand with a hole for the piece that the stand screws into on the bottom. However... the top hole??? That kills that theory I think. My first reaction was a subwoofer but I have never seen one with that middle support. Is it particle board?
The answer is: it's called a box drum. I'm not done building it, but imagine me adding 1/4" plywood to the two sides, so only the holes on either end remain open. Then, sit on one of the long sides and beat on the plywood. It creates an incredible sound. Check out and enter box drum. You'll be amazed!
Now that's a unique project! Good luck, Don!
Pretty cool!
Here is a link to a good example of one of these box drums being played.
Here are some updated pictures on the box drum. I need to add coats of polyeurothane.

Love the color. Now h ow about a video of you playing? :)

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

French cleats 101 advice please

Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS  (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL.  after years of waiting…Continue

Tags: Unklejon, french, Cleats

Started by John Hoskison in General Woodworking May 27.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service