Well you have already conquered woodburning, tin punch, and boat building. So I would guess the next thing in line would be something that involved knitting! LOL
It holds balls of yarn letting it dispense out the holes on either end?
Just kidding. Give us a hint. What room is it for?
I was leaning toward a speaker that goes on a stand with a hole for the piece that the stand screws into on the bottom. However... the top hole??? That kills that theory I think. My first reaction was a subwoofer but I have never seen one with that middle support. Is it particle board?
The answer is: it's called a box drum. I'm not done building it, but imagine me adding 1/4" plywood to the two sides, so only the holes on either end remain open. Then, sit on one of the long sides and beat on the plywood. It creates an incredible sound. Check out youtube.com and enter box drum. You'll be amazed!
Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings? I scrolled through the pics in the community and all I saw were using a DIY base cabinet. I have an extra Kreg router…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…