I'm getting ready to build an Adirondack chair based on a design by Norm Abrahm. His design is from the early 90's which is before the time of the Kreg pocket hole jig I believe. Any advice on assembly such as do's or dont's? I am using tamerack that is 3/4" thick. This way if I screw it up I can at least roast marshmallows over it and not be out a lot of cash. If I get it right the next one will be cedar. I am sure there are a few parts of this chair that will need something stronger that a pocket hole screw and a few that may only require a brad nail so I don't expect this to be 100% pocket hole construction. All thoughts and ideas are welcome. The lumber is planed and jointed and I am about to start making the parts.
Jon
Tags:
Is this your first project using the jig? A few tips I can give you is...
1. Make sure of the dimension of your lumber, especially when using plywood, so your jig settings are correct.
2. Use scraps to test your jig settings and adjust either the collar on the bit or the guide on the jig until you get the desired results.
3. Read your jig user's manual and look at the provided images when making other than normal 90 degree pocket holes.
4. Use the correct size screws for your project's lumber size.
5. Drink plenty of fluids.
I'm sure others will have more tips, but the number one tip anyone will give you..."Work safely!"
Hi James,
Thanks for the reply, this is not my first project, just my first Adirondack chair. All lumber is correct but I am wondering if anyone has any advice on fastners and placement whether that be the pocket hole screws, brad nails, carriage bolts, etc. I am going for a look that hopefully has as many of the fasteners hidden as possible. I don't really want to use plugs of any sort if I don't have too.
Do you have plans, cutlist or any images that may help you? Is this the chair you plan on making....
You can get ideas as to where you need carriage bolts for support. I doubt that Norm used a Kreg Jig, but I'm sure there are ways to modify the project to use pocket hole joinery. Here is a link to this chair for free plans....free chair plans....you just provide your email and then next screen you click on "Get plan" and a pdf file will open up showing the chair's plan, then save or print for future use.
I know you might be set on doing the chair from Norm Abram, but check out this video from Lowe's shop class....
Hi James,
Yes the chair in the picture is the one I'm creating. I am a draftsman by trade so I took a 3D CAD model based on this picture and reverse engineered it into all the seperate pieces and made 3D and 2D plans out of everything. Hopefully I have all the correct dimensions for every piece. We'll find out, either I'll be sitting in it roasting marshmallows or roasting marshmallows over it in the fire. ;)
Hey, I will join you and we can also do that campfire scene from "Blazing Saddles". LOL
Hi Jon,
How did this project turn out? Are there any pictures posted. I still new to this site so I'm still learning to navigate.
Tim
Jon Drew said:
Hi James,
Yes the chair in the picture is the one I'm creating. I am a draftsman by trade so I took a 3D CAD model based on this picture and reverse engineered it into all the seperate pieces and made 3D and 2D plans out of everything. Hopefully I have all the correct dimensions for every piece. We'll find out, either I'll be sitting in it roasting marshmallows or roasting marshmallows over it in the fire. ;)
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service