I'm looking for some plans to make a out feed table for my Craftsman table saw. It's an old contractor type saw. I saw a set of plans somewhere that used pocket holes to build the frame and legs, but don't know where I saw it. I have a nice half sheet of 1" Baltic Birch plywood for the table top. Any help would be appreciated.
Tags:
Lots of info available here
use search engine ''google''
enter ''table saw outfeed table''
peruse and select what interests you
Type "outfeed" in the search box on this page (upper right corner)
Thanks!!!
nothing fancy but convertible http://kregjig.ning.com/photo/im003919-1?context=album&albumId=...
Built this table http://www.thewoodwhisperer.com/videos/tablesaw-outfeed-table/ I saw on the Wood Whisperer a few years ago. Works great and was easy to build.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service