Just bought my K4 yesterday at Menards because it fit in "the bag", so I got 15% off. Will be using it this afternoon on a small project. I've used a friends before and it worked great. About time I got my own.
You have to decide if you're willing to wait for it, or if you want to start using it now. I'm that way with my paintball gear. So many of my teammates are willing to go online for a deal, but they have to wait for it to arrive. I go into our local paintball store and get to touch it, examine it, and buy it now. There is no wait.
Buy on line from Coastaltool.com. K3 cost 139.00 and they throw in a 675 assorted screw kit free. Shipping is 8.00 and individual screw in various quantities are much cheaper than buying from Lowes or Home Depot. I am quite happy with it. While you are at it don't forget to add a right angle clamp you will be needing it.
Russ G said:
Why not get it where you could easily return it if you're not happy! You will be though!!!!!
I bought mine at Lowe's because I wanted to use it right away, but if you have the patience and want to use the plans they provide, buy it through the infomercial. You get no plans if you buy it at a store, although you can download about a half dozen of the plans from the website. But if you wanted to buy ALL of the plans they give you when you buy using the toll-free, it would cost significantly more than paying the shipping charges.
I bought mine at the nearest Woodcraft store (no I have no affiliation). I like to support them whenever possible because they are a good resource and carry things the big box stores don't. Support the local economy when possible.
We also have an area Woodcraft store, and I just recently found out that they have a reasonably impressive inventory of Kreg items. I had been thinking about buying a face clamp and a 90 degree clamp for a while, so the last time I had to visit to get something we needed for a project at work, I also whipped out my own VISA and treated myself! I used them both within days for a home cabinet project.
This might have been discussed before but I can't find the right answer.I recently upgraded to a Kreg 720 Pro and gave away my old R3. The old kit had a chart in inches & mm for setting the collar depth of the Kreg pocket hole drill.…Continue
Hi everyone,Just got my 720 jig. I noticed that when I put the drill bit into the drill guide, it does not go through. The tip of the drill bit does not extrude from the guide. A photo is attached.I wonder if it is normal, because if the bit does…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…