Kreg Owners' Community

I wonder if I need this tool?  Does it make assembly a lot easier? Where do folks who onwthis clamp use it?

Views: 632

Reply to This

Replies to This Discussion


It's a very handy and useful tool---

makes for easier and speedier assembly.

I use it primarily to hold pieces together to obtain optimum clamping, to keep the joined ''closed'' before installing the pocket hole screws.

I use some that I got from Rockler. It does help speed things up.

definitely useful!

George, It is a great tool used to clamping together two pieces of wood in a 90 degree joint.  The clamp has a pointed end on one side of the clamp and a flat pad on the other.  To use it place the two pieces together in its intended 90 degree angle,  insert the pointed end into one to the pocket holes and the other around the end of the joint onto the oposing piece and clamp together.  Screw in your screws and then remove the clamp and then screw in a screw where the clamp had been.  You can make the 90 degree  joint without the clamp but having the clamp insures you of a less trouble free assembly.  I use mine to build cabinet boxes and also to attach face frames to the cabinet edges. 

Great tool, but like I said, the clamp can dimple soft pine face frames.

Like Jay said, one can start at one end of the joint, and leap-frog ahead of the next screw in order to pull the joint into alignment.  Maybe the real problem is just the crooked wood I try to assemble.  Ugh!

I find the clamp so useful that I have two of them and have even been known to drill a pocket hole or two in order to utilize the clamps, even when not using pocket screws to secure the assembly.  Very handy clamps.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Adaptive Cutting System/Saw Blade

I have had the ACS for about a year.  Was wondering if there any other blades, like a Diablo, that will fit the saw?Continue

Started by Randall H Gress in Beginners' Zone Feb 20.

AutoMaxx 6" clamp not working

I have been using the Automaxx 6" clamp for two plus years, and recently the clamp is impossible to close the handles to secure the work and my jig. I cannot close the handles no matter how much pressure I can exert. I open the clamp to max to reset…Continue

Tags: clamp, inch, 6, Automaxx

Started by Anthony M Calabrese in Other Kreg® Products Feb 12.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service