Kreg Owners' Community

Hi There fellow pocket holers,

I am working with 1 3/8" (35mm) hardwood (oak) stock.

The Kreg Owners Manual says (or rather implies) that I should be using fine thread screws at 2" (51mm)  length.

Problem is I cannot find these to buy anywhere.

So I am wondering -

Does Kreg make them in the first instance?

If not

What might be a suitable alternative?

Response from Kreg directly would be appreciated also.

Regards

Novice

Views: 219

Reply to This

Replies to This Discussion

I came across this on-line response from Kreg:

https://www.kregtool.com/customer-service/questions/joining-tools-q...

"Why is there not a fine-thread screw longer than 1-1/2"?

We do not offer a fine-thread screw longer than 11/2" due to the fact that fine-thread screws have a smaller diameter and have the tendency to break off in harder woods. If you are working with hardwoods thicker than 11/2", you can set your jig up for 3/4" and use the 11/2" fine-thread screw. This will give you almost 1" into the mating piece, creating a strong joint."

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

New to K5 and pocket holes, any video’s on the materials listed below?

I am using Danny Proulx book on shop workstations. I am deciding whether to use MDF or Melamine. He calls for MDF. However; I like the looks of the melamine.  I am a little leery of using pocket holes for it. One of the main reasons is I have no…Continue

Started by Michael Lusk in Beginners' Zone yesterday.

Adaptive Cutting System T-Track Stops Mod 1 Reply

I bought the ACS a couple of weeks ago & have been pleased with the results on my first small project (LP record crates)... I was disappointed with the plastic accessories for the table-top, especially the T-Track stops. I'm pretty sure they…Continue

Started by John Moore in Beginners' Zone. Last reply by Deac Manross May 17.

Product Reviews

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_