Kreg Owners' Community

Michael Campbell's Discussions (68)

Discussions Replied To (63) Replies Latest Activity

"As John said, don't know any corded drill with a clutch.  So always use cordless.  …"

Michael Campbell replied Oct 20, 2011 to Power or cordless

9 Oct 28, 2011
Reply by Johnny D. Rich

"I suggest Ana White, she is a member here also"

Michael Campbell replied Oct 7, 2011 to Good wood working plans? Site?

31 Dec 29, 2012
Reply by Jens Jensen

"I would never question Jay, he is a great woodworker.  But I always use coarse threa…"

Michael Campbell replied Jun 26, 2011 to Coarse vs Fine Thread Screws

12 Jun 19, 2012
Reply by Martin Rosendahl

"Brian, I would use a clear on cedar.  but if you seal it you can't smell it..... lea…"

Michael Campbell replied Jun 15, 2011 to Stains for Cedar Wood

8 Jun 5, 2012
Reply by Ken Darga

"maybe lin seed oil will seal it in,,, not sure so look it up..  good luck"

Michael Campbell replied Jun 14, 2011 to stain seeping up through butcher block?

1 Jun 14, 2011
Reply by Michael Campbell

"use the maple plug,  stain the project without plugs,  add plugs and as ken said use…"

Michael Campbell replied Jun 14, 2011 to Contrasting Hole Plugs

10 Jun 17, 2011
Reply by Andrew James Kavanaugh

"I always build my face frame 1st,  build away then add each pc. of ply  sides first …"

Michael Campbell replied Jun 14, 2011 to Trimming out a bar

2 Jun 14, 2011
Reply by Michael Campbell

"I always use the 3-4-5 for large squares,   at 75x40.  If you measure 52" on the 75"…"

Michael Campbell replied Jun 14, 2011 to What is the best way to square a Frame?

22 Jun 19, 2011
Reply by Steve Bennett

"Gary I completly agree with Ken to butt the boards with treated, when you buy a trea…"

Michael Campbell replied May 24, 2011 to Using Deck Jig.

19 May 25, 2011
Reply by Noah Cantrel

"Ouch Will,  I have done it too.  Your not alone"

Michael Campbell replied May 24, 2011 to Pocket hole joinery and round-over bits

10 May 26, 2011
Reply by John Schaben

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Replacing existing slides but cannot remove drawer front

The Kreg slides are made to work with new drawers before putting on the drawer front. In my situation, I cannot remove the existing fronts which means when reversing the jig to hold the draw, it’s at an angle. Not sure what I should do to make them…Continue

Started by Jay Homeyer in General Woodworking Apr 25.

Parts

The Clamp anchor screw broke on my mobile project center.  How can I acquire a replacement?Continue

Started by Jon J Howard in Beginners' Zone Apr 20.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_