Kreg Owners' Community

George Stoltz's Discussions (25)

Discussions Replied To (15) Replies Latest Activity

"Right.  I was having a problem months ago when I set the collar on the drill to the…"

George Stoltz replied Sep 26, 2013 to Difficulty working with particle board shelving from Lowe's

14 Nov 22, 2016
Reply by Merle Nash

"This was a case of operator error.  When I set the collar on the drill bit I used th…"

George Stoltz replied Sep 24, 2013 to Difficulty working with particle board shelving from Lowe's

14 Nov 22, 2016
Reply by Merle Nash

"Ken, All suggestions are good.  I used a 2 inch deck screw, and the weight on each…"

George Stoltz replied Apr 21, 2013 to Difficulty working with particle board shelving from Lowe's

14 Nov 22, 2016
Reply by Merle Nash

"I used the coarse thread screws that came in the case holding five different screws…"

George Stoltz replied Apr 20, 2013 to Difficulty working with particle board shelving from Lowe's

14 Nov 22, 2016
Reply by Merle Nash

"Thanks, Hugh -- and others, too.  The stain did not match as well as the sample I m…"

George Stoltz replied Feb 10, 2013 to My first project using the Kreg jig is completed

11 Feb 13, 2013
Reply by Ryan McLaughlin

"A another shop-made single-runner miter slide.Slide-bar to fit miter slot in table t…"

George Stoltz replied Jan 27, 2013 to Safety: Is there anything wrong with this technique

17 Jan 30, 2013
Reply by Larwyn

"Ken, Great suggestion on the masking tape.  I am not sure I follow your last commen…"

George Stoltz replied Jan 27, 2013 to Safety: Is there anything wrong with this technique

17 Jan 30, 2013
Reply by Larwyn

"I have already done that.  The real issue is that a $200 Ryobi saw only has limited…"

George Stoltz replied Jan 27, 2013 to Safety: Is there anything wrong with this technique

17 Jan 30, 2013
Reply by Larwyn

"I realize this is not a perfect technique.  I used it safely.  No knots in the wood.…"

George Stoltz replied Jan 26, 2013 to Safety: Is there anything wrong with this technique

17 Jan 30, 2013
Reply by Larwyn

"Shawn, I agree even though this is my first project.  I am doing a "dry assembly" w…"

George Stoltz replied Jan 25, 2013 to First project should I assemble or stain and seal and then assemble

9 Jan 25, 2013
Reply by George Stoltz

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

First time I really had a need for the ACS miter guide.

I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue

Tags: ACS

Started by Adam in General Woodworking May 6.

What thread and size screw to use 2 Replies

I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue

Started by Mike Bohannon in Beginners' Zone. Last reply by Jay Boutwell Apr 19.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_