View
Discussions Replied To (4) | Replies | Latest Activity |
---|---|---|
"The joint you are referring to is a dado joint. The reason for using pocket holes i…"STEPHEN R. SMALL replied Sep 2, 2012 to dato's vs Kreg |
2 |
Sep 20, 2012 Reply by kenny from Sundre |
"Thank you, Ken and James."STEPHEN R. SMALL replied Sep 2, 2012 to Is there a table that specifies screw lengths for joining materials of different thicknesses with a pocket jig? |
5 |
Sep 8, 2012 Reply by James Waller |
"I would suggest that the screws you are using could be too short. Another possibili…"STEPHEN R. SMALL replied Sep 2, 2012 to I'm new to the sometimes my screws just been instead of typing is this something I'm doing wrong or what can I do to fix this? |
5 |
Sep 2, 2012 Reply by Ken Kelly |
"The way that I see it, it is important for the pocket hole to be drilled such that t…"STEPHEN R. SMALL replied Sep 2, 2012 to Joining Different thickness materials Using a Kreg Jig |
12 |
Sep 3, 2012 Reply by Ken Darga |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service