Kreg Owners' Community

Shift's Discussions (46)

Discussions Replied To (41) Replies Latest Activity

"Interesting ... I attached my breadboards with screws/pocket holes all the way acros…"

Shift replied Jun 20, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"Big thanks Jeff. Funny thing is I'm not using a poly finish and only use central ai…"

Shift replied Jun 20, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"Thanks for the 101 Rick ... and  Jeff for breaking that method down in detail. I thi…"

Shift replied Jun 20, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"This article on table tops suggests using extra large pocket holes in the apron to a…"

Shift replied Jun 20, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"Rick - is there anything that can be done to fill in those gaps?  There's a few on t…"

Shift replied Jun 19, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"Thanks for the schooling everyone. Cupping was definitely the wrong word to use. "

Shift replied Jun 19, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"thanks rick."

Shift replied Jun 17, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"As far as i understood, the idea is to drive the screw all the way in and then back…"

Shift replied Jun 15, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"I know this thread is old, but ... I still wanted to wrap up it up with a big thank…"

Shift replied Mar 4, 2012 to Arrrgh. Can't make tight joint with the kreg jig

61 Mar 4, 2012
Reply by Andrew I Harding

"Can't thank everyone here enough for all the advice and insights.   Slowing down the…"

Shift replied Nov 3, 2011 to Arrrgh. Can't make tight joint with the kreg jig

61 Mar 4, 2012
Reply by Andrew I Harding

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_