Kreg Owners' Community

Scott G's Discussions (16)

Discussions Replied To (14) Replies Latest Activity

"Just the legs? Not the whole saw? If it's a standard table saw, does the manufactur…"

Scott G replied Mar 1, 2017 to Need Table Saw

5 Mar 1, 2017
Reply by Ken Darga

"I've no idea if you did this or not, but when I first got my jig I'd incorrectly set…"

Scott G replied Sep 10, 2014 to Help

6 Sep 10, 2014
Reply by Scott G

"Ah... just found this one as well: http://www.incra.com/product_jfc_miterslider.htm"

Scott G replied Dec 23, 2013 to jig & fixture bars

4 Dec 23, 2013
Reply by Scott G

"I need to build a cross cut sled as well. I'd found this... https://www.youtube.com/…"

Scott G replied Dec 23, 2013 to jig & fixture bars

4 Dec 23, 2013
Reply by Scott G

"Yup. The bench top. I'll try adding some wax. Doing that worked wonders for my table…"

Scott G replied Oct 31, 2013 to Kreg Router Table Fence Cam Locks

6 Oct 31, 2013
Reply by KregRep

"There's probably a dozen ways to accomplish my goal. I'm just wondering if anyone el…"

Scott G replied Oct 31, 2013 to Kreg Router Table Fence Cam Locks

6 Oct 31, 2013
Reply by KregRep

"The other thing I've learned - recently - is that some lumber yards will only cut ce…"

Scott G replied Oct 30, 2013 to Price per board foot

18 Oct 30, 2013
Reply by Ken Darga

"Phew... all done... Here's the project: https://kregjig.ning.com/photo/albums/sofa-t…"

Scott G replied Oct 28, 2013 to DVD - Pocket Hole Solution to Tables - About the Legs

10 Oct 28, 2013
Reply by Scott G

"It was expensive. But worth it for me for the less effort. The project is coming alo…"

Scott G replied Oct 24, 2013 to DVD - Pocket Hole Solution to Tables - About the Legs

10 Oct 28, 2013
Reply by Scott G

"Sometimes the best way to solve a problem is to avoid it! While I want to learn smar…"

Scott G replied Oct 21, 2013 to DVD - Pocket Hole Solution to Tables - About the Legs

10 Oct 28, 2013
Reply by Scott G

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_