Kreg Owners' Community

Gary Nalen's Discussions (12)

Discussions Replied To (11) Replies Latest Activity

"I will put the plug in the outside holes,  maybe the inside, but you wont see them w…"

Gary Nalen replied Sep 19, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

"Its a game, so i won't go that far.  The edges visible will be ok.   I should just g…"

Gary Nalen replied Sep 19, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

"Are Kreg joints on the outside a Bad Idea?  Usuall I screw and countersink from the…"

Gary Nalen replied Sep 19, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

"My main reason for using Kreg joints on this project , is i didnt not want any faste…"

Gary Nalen replied Sep 19, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

"Steve,    Do you do this in conjunction with the pocket holes.? "

Gary Nalen replied Sep 19, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

"I am a bit confused?   Will it crack when I am drilling to pocket hole. or when i am…"

Gary Nalen replied Sep 16, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

"Could I drill thru the pilot hole so it wont crack, or is it the pressure of the scr…"

Gary Nalen replied Sep 16, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

"would the micro block allow me to install closer ? I will re adjust for 1" minimum"

Gary Nalen replied Sep 16, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

"I was just laying it out, I can fit the hole 1/2 in from the board edge,  Does anybo…"

Gary Nalen replied Sep 15, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

"I am just trying to get the gorners locked down tight.   They will be very cool when…"

Gary Nalen replied Sep 15, 2011 to How close to ends of boards can I place a hole

22 Sep 19, 2011
Reply by Gary Nalen

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_