Kreg Owners' Community

Derek Gould's Discussions (64)

Discussions Replied To (57) Replies Latest Activity

"Good points Ken. In my (limited) experience, I've found that NiCad batteries haven't…"

Derek Gould replied Jan 25, 2014 to What kind of drill should I buy?

79 Oct 24, 2017
Reply by Ken Darga

"I use a Mastercraft Maximum 10" sliding miter saw, works well. I usually hook up my…"

Derek Gould replied Jan 24, 2014 to sliding compound miter saw

42 Jan 27, 2014
Reply by Leslee

"I  have a Bosch Li-Ion set; drill and impact driver, two batteries and a charger. Us…"

Derek Gould replied Jan 24, 2014 to What kind of drill should I buy?

79 Oct 24, 2017
Reply by Ken Darga

"Plywood is usually fairly stable, but not perfect. Did you finish both sides of it i…"

Derek Gould replied Jan 24, 2014 to Wood warpping

6 Jan 26, 2014
Reply by Kevin Skattebo

"Hi John; The first thing that comes to mind is checking the *true* thickness of the…"

Derek Gould replied Nov 26, 2013 to Screws showing through!

15 Nov 26, 2013
Reply by ray vile

"I've noticed the same thing; I assumed it was typical to have to do a little bit of…"

Derek Gould replied Nov 12, 2013 to Pocket Hole troubleshooting...Experts please weigh in!

8 Nov 13, 2013
Reply by Raymond Buitron

"I agree with Jay's comments; I'm much more of a newbie, but I've done it both ways a…"

Derek Gould replied Nov 12, 2013 to Best time to drill the pocket holes

4 Nov 18, 2013
Reply by Steve McCullough

"I agree with drilling from the outside in. I've built a few things with 1/2" ply, an…"

Derek Gould replied Nov 11, 2013 to Is it my Jig, my plan, or me that is defective?

8 Jan 20
Reply by Wayne

"Hi Jim; The deck was built in the summer of 2012; i posted some pictures of it here.…"

Derek Gould replied Nov 3, 2013 to RE: the Deck Jig..... your thoughts please?

3 Nov 3, 2013
Reply by Derek Gould

"I've found the same issue. I think it depends heavily on the saw you're using. I hav…"

Derek Gould replied Nov 3, 2013 to Strait cut last few inches on rip cut

18 Nov 3, 2013
Reply by Derek Gould


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service