Kreg Owners' Community

Derek Gould's Discussions (64)

Discussions Replied To (57) Replies Latest Activity

"I've cut lots of sheet stock using a homemade saw guide. Lots of plans out there to…"

Derek Gould replied Mar 4, 2014 to Can One Live Without a Table Saw?

34 Mar 23, 2014
Reply by rich b.

"I made a bed using my KMS, similar to the plans on Ana White's site. It would have b…"

Derek Gould replied Mar 4, 2014 to Any Recommendations??? confused which to purchase

8 Mar 6, 2014
Reply by Richard

"Yes, dusty, heavy, and not particularly strong. Yes, I was thinking glue on the fron…"

Derek Gould replied Feb 17, 2014 to Face frames to cabinets

9 Feb 18, 2014
Reply by Ken Darga

"Drill a hole 6" in from each end, and roughly every 6". With MDF, you'll want to be…"

Derek Gould replied Feb 17, 2014 to Face frames to cabinets

9 Feb 18, 2014
Reply by Ken Darga

"Good advice, and a good video. I've found that I start low and work up; use just eno…"

Derek Gould replied Feb 17, 2014 to Drill setting ...clutch

3 Feb 18, 2014
Reply by Ken Darga

"Brian, you're using mitered corners? I'd love to see some photos. These will be stan…"

Derek Gould replied Feb 15, 2014 to Cabinet doors with Kreg Jig

40 Mar 7, 2014
Reply by Rick

"If you're building cabinets. Thermwood has a free package called eCabinet that works…"

Derek Gould replied Feb 12, 2014 to Drawing Software for Plans

14 Mar 28, 2014
Reply by Norman Conyer

"Looks good David; So you cut your dado but leave it shy of the end on the rails? I w…"

Derek Gould replied Feb 2, 2014 to Cabinet doors with Kreg Jig

40 Mar 7, 2014
Reply by Rick

"C'mon, Ken, that's a little harsh. High-end tools are great to have, but for the mos…"

Derek Gould replied Feb 1, 2014 to What kind of drill should I buy?

79 Oct 24, 2017
Reply by Ken Darga

"Great that you got quick response from Kreg. One thing I'll mention; check the thick…"

Derek Gould replied Jan 28, 2014 to problem setting kreg jig for 1/2 inch

8 Jan 28, 2014
Reply by james wilhelm

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_