Kreg Owners' Community

Derek Gould's Discussions (64)

Discussions Replied To (57) Replies Latest Activity

"Good point, Nick; in my experience pulling through is usually due to one of; Improp…"

Derek Gould replied Jul 21, 2016 to Use with plywood

6 Aug 7, 2016
Reply by Tim Grace

"I used the smaller of the two sets of spacers, I believe they are 1/4"? The deck are…"

Derek Gould replied Jul 19, 2016 to Deck Jig water trap

12 Jul 27, 2016
Reply by Gary roofner

"It will work perfectly with 3/4 oak plywood. I built kitchen cabinets for my cottage…"

Derek Gould replied Jul 19, 2016 to Use with plywood

6 Aug 7, 2016
Reply by Tim Grace

"Hi Jim; I also built a deck using PT wood. A lot of PT lumber used to be wet, but as…"

Derek Gould replied Jul 19, 2016 to Deck Jig water trap

12 Jul 27, 2016
Reply by Gary roofner

"I use an Oneida Dust Deputy with a shop-vac.I didn't START OUT using it, but after m…"

Derek Gould replied Feb 13, 2015 to How well dose a shop vac with a seperator work for dust collecting

25 Feb 14, 2015
Reply by Lykle Schepers

"Jay's advice -- as always -- is good. I'd suggest staying away from pine for cabinet…"

Derek Gould replied Feb 13, 2015 to Birch and Pine?

5 Feb 13, 2015
Reply by Derek Gould

"Agree with Jay's comments. I've found there are 3 keys to getting square joints; 1.…"

Derek Gould replied Nov 18, 2014 to Keeping a right angle between two mating parts

3 Nov 18, 2014
Reply by Derek Gould

"As a Canadian and a dedicated Kreg user (Kreg Jig, Shelf pin jig, Deck jig, Square C…"

Derek Gould replied Oct 1, 2014 to Membership and Competitions

7 Oct 2, 2014
Reply by james wilhelm

"Thomas, just out of curiosity, how many fingers do you have (left)?  :-) On a seriou…"

Derek Gould replied Mar 20, 2014 to Can One Live Without a Table Saw?

34 Mar 23, 2014
Reply by rich b.

"I have the Dewalt; very happy with it. Accurate, light, powerful, portable, all the…"

Derek Gould replied Mar 4, 2014 to I have narrowed saw choice to two. Opinions please;

13 Mar 10, 2014
Reply by Ken Darga

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_