Kreg Owners' Community

Gary roofner's Discussions (690)

Discussions Replied To (601) Replies Latest Activity

"Two if you look at all three pictures only one side is sloted in the table the other…"

Gary roofner replied Aug 13, 2010 to Router table purchase

10 Aug 16, 2010
Reply by duane ribron

"This shows the sloted side."

Gary roofner replied Aug 13, 2010 to Router table purchase

10 Aug 16, 2010
Reply by duane ribron

"Thanks for the advise I went with the random orbital from sears since I had a sears…"

Gary roofner replied Aug 12, 2010 to Sanders

9 Aug 14, 2010
Reply by Jens Jensen

"I like your plans for bench and table. I am thinking of using your design and making…"

Gary roofner replied Jul 19, 2010 to Woodworking plans

7 Jul 20, 2010
Reply by John A Cason II

"The top on th entertament unit is that a solid 2 inch top or banded? "

Gary roofner replied Jul 19, 2010 to Mixing Red oak hardwood and Red oak plywood

4 Jul 20, 2010
Reply by John A Cason II

"Yes settings were ok it was strong but not like when you glue the joint."

Gary roofner replied Jul 17, 2010 to Putting pocket holes when you do not want to edge glue.

2 Jul 20, 2010
Reply by Dan Fiorito

"You have just saved me over $100 dollars. was going to buy a router table top from r…"

Gary roofner replied May 27, 2010 to Photos of your last woodworking purchase!

71 Feb 5, 2011
Reply by ray vile

"Just tried this I'm into r/c airplanes before you put your screws in to mdf coat the…"

Gary roofner replied May 23, 2010 to MDF vs Plywood for garage workbench

15 Dec 30, 2015
Reply by Elizabeth Leveques

"Instead of 3/4 you would set the jig for 3/8 a 45 reduces by 50 %"

Gary roofner replied May 23, 2010 to kreg a compound?

11 Dec 30, 2015
Reply by Elizabeth Leveques

"I should have said a finish sander on pine sorry."

Gary roofner replied May 12, 2010 to Sanders

9 Aug 14, 2010
Reply by Jens Jensen

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone on Thursday.

Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 7 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_