Kreg Owners' Community

Glen S's Discussions (82)

Discussions Replied To (81) Replies Latest Activity

"I have an old hose from an original ShopVac. That ends fits inside perfect. There ar…"

Glen S replied Jan 4, 2019 to Dust extraction on K5

12 Jan 6, 2019
Reply by Stadler le Roux

"Yes the teeth should be towards the clamp. One may have slipped thru the cracks at K…"

Glen S replied Jan 4, 2019 to Having issues with K5

6 May 4, 2020
Reply by Graham

"My DC setup for the K5. Like I mentioned before the smaller shop vac gets everything…"

Glen S replied Oct 9, 2018 to K5 VACUUM

17 Feb 2, 2021
Reply by Alain R Gardner

"My 10" compound miter table was "dragging" on pivot. I took it to a RIDGID factory a…"

Glen S replied Oct 9, 2018 to Ridgid tools

1 Oct 9, 2018
Reply by Glen S

"OK. Looks like Kreg is gonna fix you up."

Glen S replied Oct 2, 2018 to Rip-Cut Ruler

5 Oct 2, 2018
Reply by Glen S

"I would,, and do,, use prefinished 3/4" Birch or Maple ply from Menards. The left ov…"

Glen S replied Oct 2, 2018 to Cabinets and the best wood choice for the carcass.

5 Nov 18, 2018
Reply by Dave Johnson

"Are you leaving the weight of the saw on the rip-cut when you adjust it? I hold the…"

Glen S replied Sep 17, 2018 to Rip-Cut Ruler

5 Oct 2, 2018
Reply by Glen S

"It matters not which screws you use. What does matter is whether or not you used so…"

Glen S replied Sep 4, 2018 to Pocket screws to attach table tops

3 Sep 28, 2018
Reply by Michael Lew

"The older ShopVac brand hoses with the 12" solid ends are all you need for the K5. T…"

Glen S replied May 15, 2018 to K5 VACUUM

17 Feb 2, 2021
Reply by Alain R Gardner

"I have the setup block that came with the bit. It works great but I don't have a mic…"

Glen S replied May 12, 2018 to Making a Drawer Lock Joint

3 May 12, 2018
Reply by Glen S

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_