Kreg Owners' Community

Tim Grace's Discussions (137)

Discussions Replied To (136) Replies Latest Activity

"The difference is that in the HD example the force is being applied to the top rail…"

Tim Grace replied Feb 9, 2017 to Pocket Hole Orientation and Strength

4 Feb 9, 2017
Reply by KregCS

"My thought on the wood is that the screws may have hit "soft" spots that are further…"

Tim Grace replied Feb 9, 2017 to Screws not holding in 2x6 douglas fir

14 Feb 20, 2017
Reply by Michele

"Whenever I edge join 2X lumber, I cut the rounded edges off, either using the table…"

Tim Grace replied Feb 8, 2017 to Screws not holding in 2x6 douglas fir

14 Feb 20, 2017
Reply by Michele

"In my opinion, what you have is the way it should be done, with the top and floor si…"

Tim Grace replied Feb 8, 2017 to Pocket Hole Orientation and Strength

4 Feb 9, 2017
Reply by KregCS

"You didn't mention which jig/system you had. Assuming K4 or Micro (I don't have a K3…"

Tim Grace replied Feb 5, 2017 to Pocket holes in a really long member?

4 Feb 6, 2017
Reply by Gary roofner

"I have tried a black stain for a small project. It worked Ok, but I wasn't looking f…"

Tim Grace replied Feb 1, 2017 to Black paint finish

8 Apr 14, 2017
Reply by Kirby Bradley

"Kinda depends on what you are looking to do and what your budget is. Are you looking…"

Tim Grace replied Feb 1, 2017 to Help

1 Feb 1, 2017
Reply by Tim Grace

"Also, most jigsaw blades will cut on the upstroke, so keep the good side down when c…"

Tim Grace replied Jan 27, 2017 to 3/4 birch plywood problem

15 Apr 8, 2017
Reply by Brian Johnson

"Set the jig to the actual dimension of the wood you are drilling into.   In this cas…"

Tim Grace replied Jan 22, 2017 to Kreg setting for 3x3

1 Jan 22, 2017
Reply by Tim Grace

"Danish oil, clear shellac, clear poly, etc. I'm not a big fan of stains in things th…"

Tim Grace replied Jan 19, 2017 to Card table

5 Jan 22, 2017
Reply by Glen S

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_