Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Setting depth on Kreg jigHi all...I just recently started using my Kreg jig.....when setting the stop on the drill bit (as well as determining screw length) what is… Started by Jeff Novak |
4 |
Jan 31, 2011 Reply by Jeff Novak |
How many boxes of screws have you gone through so far?On Saturday, I noticed I'm about to polish off my second box of course thread screws. That's a ton of projects under my belt, I'd say. Ho… Started by Don Grubish |
26 |
Jan 25, 2011 Reply by Mark Niver |
12v impact driver to use for the jigFirst time kreg jig user, last night I drill my first pocket hole and my drill was out for borrow, I grabbed my 12v impact driver and it wo… Started by Derek Vattelana |
7 |
Jan 23, 2011 Reply by steve kidd |
Thread TypeI am wanting to drill screws into a 1.5 inch piece of hardwood. The chart says to use 2.5 inch screw. The problem is, I can't find 2.5 in s… Started by Steven Croney |
2 |
Jan 17, 2011 Reply by Steven Croney |
Table constructionI am going to be making table/desk with a 80" table top. I will will using 4x4 for the legs, and 2x4 for the frame. What size screws do I n… Started by Steven Croney |
3 |
Jan 1, 2011 Reply by James Waller |
Attaching Thinner StockI see that the thinnest material setting is 1/2 inch on my jig. Unfortunately, I have a need to attach material such as 1/4 inch or 3/8 in… Started by Charles Gardner |
0 | Dec 19, 2010 |
My screw tips are showing...please helpso I am somewhat a newbie to the kreg jig, i really like it, however... once in a while my screw tip comes out....let me explain.. usin… Started by andrew edens |
11 |
Dec 7, 2010 Reply by Joseph E. Esquivel |
How to attach a Kreg Jig to 2 HP Dust CollectorI am a fairly new Jig customer and this is my first post on this forum. So far I have really enjoyed using my Kreg Jig. It is a very useful… Started by Chris Dinsmore |
2 |
Dec 2, 2010 Reply by John Schaben |
How thin is your stock?Ok - since I (duh) started the other discussion about 2/4 stock before I actually thunk it through. I am looking to build boxes for my pan… Started by David J. Drahmann |
3 |
Dec 2, 2010 Reply by John Looser |
Screw Gauge ???Not having immediate access to Kreg screws I need to know what gauge to use for 1 1/4" sheet metal screws. Can someone help please?Thanks R… Started by Robin Russell |
3 |
Nov 28, 2010 Reply by Robert J Guidry Sr |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service