Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
screw questionjust wondering which blue kotes to get for pressure treated pine. fine or coarse Started by david almond |
2 |
Feb 27, 2010 Reply by Jens Jensen |
Breaking Scews?New to Kreg system, bought a K3 Master, assorted screw kit, ran a couple of test joints without any problems, and was quite impressed at jo… Started by Donald Lawrence |
7 |
Feb 10, 2010 Reply by KregRep |
stop collar locationFixing chair legs - upright 1 x 1" thick - runner 3/4 x 3/4" thick so what is the proper locating for the stop collar and portable block lo… Started by Don Schaffer |
1 |
Feb 1, 2010 Reply by KregRep |
NewbieI'm really new to the whole woodworking world and am taking on a fairly large project. The project requires me to edge join two pieces of 3… Started by Jerry A. Brauner |
5 |
Jan 30, 2010 Reply by Jerry A. Brauner |
Drill CollarI have been using my Kreg Jr. and it is amazing how strong the joints are but I have had trouble with the collar on the drill slipping. Too… Started by Chris Clute |
16 |
Jan 29, 2010 Reply by Donald Burch |
my first projectI'm building a child's desk out of 3/4 plywood. It's now dry assembled using about half the holes, should I plug the existing holes before… Started by dave gilman |
3 |
Jan 27, 2010 Reply by dave gilman |
Attaching Face FramesI am building some shop cabinets as practice and I can't figure out how to attach the face frames using the Kreg system. Building the carca… Started by Dave Parkis |
2 |
Jan 26, 2010 Reply by Henry Parslow |
drilll/driver vs impact driverIs there any problems with using a impact driver for driving screws? Thanks Ron Started by Ron Patterson |
5 |
Jan 19, 2010 Reply by John Rice |
Kreg Jig K2000I bought a Kreg ProPack quite some time ago (years) and opened it up last night to use it. I want to join 1" stock. The jig I have is set u… Started by James R Colloca |
2 |
Jan 9, 2010 Reply by James R Colloca |
Plastic plugsI can't get the plastic plugs to insert properly into the jig holes. 1. the hole in the plug was too small to fit over the screw head. 2. W… Started by Burke Nelson |
5 |
Dec 4, 2009 Reply by Derek |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service