Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
First Kreg UseHi I just started to use the Kreg system. Here is a photo of my first cut. I expected the holes to be a cleaner cut. I used the K4 Gig Am… Started by Andrew Kelly |
12 |
Feb 19, 2017 Reply by Andrew Kelly |
Decoratively Accent Exposed Pocket HolesCan anyone give me step by step instructions to install and stain Decoratively Accented Exposed Pocket Holes? I'm using a dark stain and w… Started by Mary G. |
2 |
Feb 13, 2017 Reply by Mary G. |
Clamp ViseI thought Kreg offered the cKamp vise plate without the clamp. I have several bench clamps so I do not really need another clamp to use th… Started by George Bokros |
3 |
Feb 13, 2017 Reply by KregRep |
Kreg Table Lift with Bosch MRF23EVSHello i have a problem and I hope to find a solution. I bought a Kreg Table Lift for my router table and today I got the Bosch MRF23EVS. I… Started by Stefano |
6 |
Feb 13, 2017 Reply by KregCS |
Pocket Hole Orientation and StrengthI am building a coffee table out of 2x2's and wanted to hide the pocket hole so that they arent visible. Below is what I have build so far,… Started by J |
4 |
Feb 9, 2017 Reply by KregCS |
Pocket holes in a really long member?I am making a face frame for a wall unit. The verticals are up to 8' long and some of the horizontals are even longer. Is there anyway to… Started by Ellen Leonard |
4 |
Feb 6, 2017 Reply by Gary roofner |
Back againWell, it was a heck of a fight, but, I am back again. I have lost all of my pertinent information. I was gone from the forum for a long whi… Started by Lowell David Sites |
5 |
Feb 2, 2017 Reply by Robert Brennan |
HelpI'm looking to buy a bandsaw for my home wood shop. Don't know what brand to buy. Can someone out there please tell me what brand work the… Started by Stacy Carlsen Sr. |
1 |
Feb 1, 2017 Reply by Tim Grace |
New plug cutter question for kreg repsWill the plug cutter cut plugs in 2 inch stock home depot only sells douglas fir in 2 inch stock? Looks to be too large. Started by Gary roofner |
2 |
Jan 31, 2017 Reply by Gary roofner |
New plug cutter questionCan plugs be cut in 2 inch stock? Home depot only sells in 2 inch stock. Plugs cut in 2 inch stock are bigger. Started by Gary roofner |
2 |
Jan 31, 2017 Reply by KregCS |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service