Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
bar stools using 2X2 furring stripsHi, I am new to wood working, did some projects using Kreg and got very excited. Rushed to make a stool for my daughter using 1X2 furring s… Started by AK |
5 |
May 25, 2011 Reply by Bev Kirk |
Question on workbenchSo I am getting ready to tackle my first project, the simple workbench. I am very excited, however I had some questions. I do not have in… Started by Scotty Gadlin |
11 |
May 24, 2011 Reply by John Hardin |
Pilot hole depth problemI built a simple bookcase out of 3/4" ply. I set the depth collar using the gauge on the case. I used 1 1/4" coarse screws. On some holes,… Started by antkn33 |
12 |
May 24, 2011 Reply by Otto Johansen |
Finishing Plywood EdgesDoes anybody know of a good technique for finishing plywood edges without covering them? Started by Walter Maldonado |
3 |
May 23, 2011 Reply by Mike Camp |
2x2 posts for a cabinetHi folks. Just bought the regular kreg jig. Never used pocket holes before Had a quick mess about and it's obvious the approach works well… Started by Rob |
0 | May 19, 2011 |
Porter cable7518 router...Can some one please tell me if Porter cable make a 240 Volt version 7518 router to suit Australian power requirements, thanks. Andrew Grzon… Started by Andrew Grzona |
2 |
May 18, 2011 Reply by John Schaben |
Shipping a Kitchen to Alaska - Kreg Jig Success StoryI recently built an entire kitchen and shipped it to Alaska using the Kreg jig. Originally it was supposed to be taken apart and re assembl… Started by John Hardin |
2 |
May 15, 2011 Reply by Ken Darga |
Kreg Screw sizeHi ya everyone, i am a newbie to diy, i have seen advertisements for the kreg k4 master system and think it is great. I am purchasing the… Started by Paul Mills |
5 |
May 14, 2011 Reply by Ken Darga |
Polyurethane helpSo I had this conference table to refinish and by the second picture you can see how the poly has "puddled".. Here is what I did and any h… Started by justin waldron |
12 |
May 13, 2011 Reply by justin waldron |
Wood Screen Doors - Pocket Holes to Prevent Sagging?I posted a couple of photos of a wood screen door that we recently purchased to replace one that has seen much better days. We're thinking… Started by Susan |
6 |
May 7, 2011 Reply by Jens Jensen |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service