Kreg Owners' Community

Beginners' Zone (1,284)

Featured Discussions

Helpful Tips for New Members

Welcome! The Kreg Owners' Community was designed to bring woodworkers and do-it-yourself project builders of all skill levels together to c…

Started by KregRepLatest Reply

My first from scratch project using my Kreg Jig Master System.

I've always wanted a house with a boat house and I finally got one! And I did this with 99.9% FREE and REPURPOSED wood. Being new to wood…

Started by Scott McClainLatest Reply

Discussions Replies Latest Activity

Accu Cut

All of my cuts are slightly beveled.  I am leaning on saw in one direction to keep it tight because it feels like there is a tiny bit of lo…

Started by Debby Rouchon

1 Feb 20
Reply by KregRep

Loft Bed

Ok, just to let you know. I don't know one end of a bit of wood to the other ! I need to build a loft bed for my 14yr old daughter for her…

Started by Chris Taylor

0 Feb 10

Pocket hole screws

Hi there Recently bought a Kreg Jig R3. The problem I have is that the 3/4 inch screws seems to be too short even though I adjusted the se…

Started by Dolf Badenhorst

1 Feb 5
Reply by KregRep

Mating 1 ½" to 1" problem

Hello, I needed to mate a 1 ½" main workpiece (the one to be drilled) with at 1" mating workpiece in a 90° attachment. Using the various ch…

Started by Guy Fisher

5 Feb 2
Reply by Michael A. Mitra

Basic Newbie Questions

Hi Everyone, I'm starting my first project and am seeking some basic advice. I'd like to build a closet system similar to this: https://kr…

Started by Matthew Craig

1 Jan 6
Reply by KregRep

A beginner wants to create a profile

Hi, I've just been accepted as a memeber (thank you!) for this community forum.  I was asked to fill out profile information, but when I c…

Started by Dan Zambon

2 Dec 5, 2019
Reply by KregRep

Using Kreg Jig HD for 4x4s into 4x4's

Hello All, First time post and first time user of the Kreg Jigs (love them).  I purchased the HD version to help me with some farmtable be…

Started by Caleb Sanz

4 Dec 4, 2019
Reply by Sam Poikail

k4 system handle stuck in down position

The handle on my k4 system is stuck and I am wondering how I get it unstuck? Has anyone else had this problem before? Not exactly sure what…

Started by Tracy Thomas

3 Nov 27, 2019
Reply by jock sloan

90 Degree Corner Clamp

What is the purpose of the round piece cut at an angle that can be rotated and locked at 2 positions? 

Started by Grant Armstrong

1 Nov 25, 2019
Reply by KregRep

Exterior Screw for Half Inch Material

I am looking for exterior pocket screws to use in 1/2 inch plywood and pine/cedar. I can't seem blue coated screws in 3/4 or 1 inch lengths.

Started by Jack Corrigan

1 Nov 18, 2019
Reply by KregRep

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Accu Cut 1 Reply

All of my cuts are slightly beveled.  I am leaning on saw in one direction to keep it tight because it feels like there is a tiny bit of looseness in the saw sled at the rear.  I don't have this problem with the Accu Rip and the same sled.  Had to…Continue

Tags: sled, saw, slop, cut, Accu

Started by Debby Rouchon in Beginners' Zone. Last reply by KregRep Feb 20.

Loft Bed

Ok, just to let you know. I don't know one end of a bit of wood to the other !I need to build a loft bed for my 14yr old daughter for her new small room.would 30X70mm be large enough to make it out ofThanks for any inputPS anyone got any plansContinue

Started by Chris Taylor in Beginners' Zone Feb 10.

Product Reviews

Kreg Jig Dust Collection Attachment

1st impression when you hold this attachment in your hand:  "not much to it", Kreg sure is makin' $$ here.



Then I installed it.. perfect fit, leaves just enough room to adjust the setting screw on my K4.



Then the real test, hook…

Continue

Posted by Grampy Meyer on February 23, 2020 at 11:36am

My K4 Master System

I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…

Continue

Posted by Randy W. Lush on August 25, 2019 at 12:30pm

© 2020   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_