Kreg Owners' Community

Is the Concealed Hinge jig by Kreg worth the money? I have never installed that type of hinge before but the video looks like its the way to go.

 

Views: 1107

Reply to This

Replies to This Discussion

The concealed hinge jig is worthwhile investment for even a project that only requires a couple of hinges!

I've drilled 100's of those 35mm holes with a small drill press - what a pain in the process that has been.

Now I pull the Kreg jig out of the drawer and in less than 5 minutes can have a door ready for installation.

Accurate, fast, repeatable, convenient - all for less than $30

Sidebar: For me, the 2 most most compelling reasons to use concealed hinges are:

I know that some tool purchase decisions can be agonizing - but - buying the Kreg concealed hinge jig is a no-brainer.

Buy it! :)

Thank for your reply. I bought the Kreg jig to install these hinges and will be using this hinge from now on.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_