Kreg Owners' Community

This is one of my favorite projects.  This is a built in shelving and cabinet.  This was once a trailer cabinet and I just took advantage of this area after we tore out the trailer cabinet and replaced it with this. Because we don't have a router table we had to have someone else make the doors.

We have quite a few projects to build.  I need  a built in closet done in the room I am gutting.  I need a coffee table and a night stand.  I need to build a bed frame with drawers.  I need to do shelving in my project room.  I need to make a table for my painting room.  The router can help me to get nice edges on everything. 

My workspace is a project in progress.  It is a barn that needs finished.  It needs doors made to help inclose it.  I need to finish putting plywood on one side of the barn.  It is not finished but has plenty of room.

When you want to build something, do research and make a drawing and do the measurements.  That is the most important tip I can think of to give

Views: 81

Reply to This

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_