Yeah...thats it!! I built a Bathroom Vanity but was not completely happy with the doors because I couldnt get them to line up correctly. (Needless to say the way I had cut them is going to make me rethink my cutlist and actual sawing ability when a table saw is needed to not available) Anyway, ive got a Kreg BenchTop Router table and i'm thinking this thing would actually fit inside it..... A case for a portable router table. Anyone ever do this before???? I've all but scrapped this as a Vanity but I could get some utility out of it somehow. My thoughts, and I havent taken any pictures yet would be to simply find the height I want, make raisers that attach simply to the insides of the cabinet casing and whola(!), router table at my height, still portable and it gives me some extra storage for some of my other Kreg extras like the tool box, some clamps, bulk screws.............AND if I place casters on one side I could move it easily through my garage wheel barrel like to wherever I'd need it. Thoughts??
Tags:
Sounds like a plan Larry. I found I use the router table much more since I've got it in a base cabinet rather than having to dig it out and set it up. I do a lot more of the nicer touches like easing edges or just doing that little extra touch that was a PIA with a bench setup.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service