Comment
Thank,s Mick, also like your term skip diving , got the fir before it went into the dumpster , HA!!!
Love those words Jim { dumpster diving } we would call it skip diving here in the U.K. nice job on the table we love to recycle.
It's the same, only different.
Ken , sorry no dumpster diving on this one , got them before they went onto the dumpster , HA!!
James,
Nice find on the Fir.
Perhaps, I need to go dumpster diving.
Jay , thanks for the very nice comment on my table , had the old slats from a bed a guy was going to throw out, did not want to see them go to waste, so designed and built the table !!! Very nice and strong wood to work with and finished it natural with two coats of polly!! Did see your router table and it did look rock solid, well done on the table , have a good day , JIM !!
Hi Jim, Nice looking table. The douglas fir does have some excellent grain figures and is a very strong and durable wood that will take abuse. I like the finish and in particular I noted the interesting method of adding the lower shelf. It should be very stable and the way you did the shelf it hides the end grain well. Douglas fir is the building wood for construction and is very abundant in the Pacific northwest. This is why I like to use 2x4's for a lot of structures that I build and in fact it is the same wood that I used to build that big router table. It is stable strong and inexpensive and holds screws and nails well, does not split as easily as spruce and holds a finish very well. Excellent choice for painted outdoor items such as tables and deck furniture as long as it is not standing in water you can expect it to last for years. I do like the table as it is one of which is different than most posted on here. It is a unique way of adding a lower shelf and yet still adding a very stable leg and shelf support at the same time. Thank you for sharing your excellence in craftsmanship.
Thanks Ken , wish I had some more of the FIR , dose have a great grain !!
Some attractive grain patterns.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community