Kreg Owners' Community

Rating:
  • Currently 0/5 stars.

Views: 729

Projects: Workbench
Favorite of 3 people

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Eric Rosenbaum on April 14, 2015 at 5:16pm

Thank you Ihor, In our disposable age, it is rewarding to find usefulness in things others have given up on.  At the same time, it saved me at least a month or two of building time.

Comment by Ihor Wyn on April 13, 2015 at 11:01pm

Great job! You repurposed and gave it a new life. Gives additional ideas for future projects.

Thanks for sharing.

Comment by Eric Rosenbaum on April 9, 2015 at 10:10am

Hi Michael, 

My original intent was to build a Roubo style bench, but soon realized there were two problems.  1.  The budget for hardwood/hardware was more than I desired to spend even without adding drawers or finished storage. 2. A table top fixed to the base was not conducive to moving the bench in the future.

 

I was at a used furniture shop and ran across a 1949 Drexel “Wentworth House” dresser  (originally retailed for $169 dollars).  It was a relatively simple design and was of sturdy hardwood construction.  I bought it for $250 and the rest is history.

 

I removed the original legs, added 5 inch pads on the corners and 2 inch pads in the center back and front, added 3 cross beams on the bottom, reinforced the interior with ¾” plywood, added ¼” plywood on the exterior sides, veneered the top and drawers, created exterior legs out of oak and matched the front profile to the chamfered and fluted corners of the old dresser.   Most of which, I used the Kreg jig. I used Kreg screws on everything.   I decided us multiple colors on the base to match the top.  

 

The top is made out of 1/3 standard 2” x 4”s, 1/3 spruce from a tree off of our farm, and 1/3 left over hardwoods (oak, walnut and cherry) which run the length in the location of the dog holes.

 

I finished with a combination of stain, Danish oil, shellac and poly.

 

I’m now designing a sliding stop frame in an attempt to avoid the dog holes all together.

 

Thanks for the kind words.

 

PS: my shop is the 3rd stall of a three car garage.  It works nicely except my wife complains about dust in the cars.

 

Comment by michael evans on April 9, 2015 at 2:15am

Nice job on the bench Eric oh to have a shop that big , I can dream I guess .

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_