Comment
I cut each end of the strips on 45 degrees on each end and I made one of the strips in 2 pieces 45 degrees on one end of each piece and used this to wedge all 4 pieces in the rabet put 1 drop of quick bonding glue in the center of each piece and on the joint of the 2 piece strip. The joint of the 2 piece strip is should be in the center.
oooh ok!, and how did you attached that stripe of wood? using a nailgun? or something?
Thanks for the comment. I put a rabet around the inside of the opening, on the inside side of the door then secured the glass with 1/4" X 1/4" stripe of wood.
hello! great job!! hw do you attached the glass to the doors? :O?
Thanks for the comment
looks great and the grian stands out.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community