Comment
Lonno, thank you very much for the compliment! I'm glad if you're able to draw from my work for your own. It really adds to a sense of accomplishment if someone else looks at your work and decides to jump in and create something as well. However, be prepared. As easy as it is, its time consuming and can burn you out. I took a couple of weeks off of the project to concentrate on other things around the house but going for my final push here this week and weekend, putting doors on the bases, getting it sanded and stained. Best of luck with your pantry cabinet! If you have questions, let me know.
Denny, Great job! You're an inspiration to the rest of us "new b's". I've been thinking about a floor to ceiling "custom built"cabinet very similar to this in my kitchen and was worried that the "bump out" cabinet in the center wouldn't look right. I want to use the other sections as pantry items with closed doors and the "bump out" section as deeper open shelves to hold the numerous kitchen appliances that I have. You've done all of the work (and a great job at that) and have inspired me to go forward with my plans. Thanks!
Thanks! I appreciate the compliment! I'm using birch ply with soft maple for the facing. I didn't really start with a thorough plan so I hope it all ties together in the end.
Hi Denny, I really like your project. Are you using birch?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community