Kreg Owners' Community

Rating:
  • Currently 0/5 stars.

Views: 208

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Jay Boutwell on May 9, 2011 at 2:25am

Thanks David, I'm glad you like it.  Lots of work but worth seeing it finished and seeing how well it  resembled the hickory and the wood work that went into the home.

 

Comment by David Dean on May 8, 2011 at 9:45pm
cool and it's all pine.
Comment by Jay Boutwell on May 8, 2011 at 4:55pm

Hello Tim, Thank you for the nice complement. Although this does resemble calico hickory this hutch is made out of pecky pine fininshed with  multi coats of clear lacquer.  I was fortunate to have build a large set of kitchen cabinets and bath cabinets for this customer of which had a large home built at the same time. It was a two story finished in knotty pine trim and panel pine doors through out.  I did the cabinet work out of rough knotty calico hickory with black expoxy in the voids and defects.  This gave it a western type appeal of which the customer having several horses and riding arena desired. 

I build the master bedroom bed and furniture out of the pecky pine with some of the same black epoxy in voids and defects.  After the finish of the project this piece was requested and wanted it out of the pecky pine to help tie the home interior trim into cabinets.  What you see here is the results and to keep with the cabinet  work in the kitchen I installed a slab of the same granite as used on the kitchen cabinet counters.

I hand painted the horse heads with porceline paint and oven baked it.  The heads are done to resemble the two favorite horses they own.

To answer you question about using a cad drawing software, I normally do not use one and do not even use a rough sketch, drawing from my prior building experience and just get a customer sizes and describtion of what they desire and start cutting.   I do this to insured that they have a one of a kind custom build.

I have a big 3-d drawing program loaded on one of my computers, that I paid a large amount of money for.  Although it will draw anything you want in multi layer drawings about the only time I use it to do a cad drawings for other contractors or for my self in preparing for a building permit.

Google sketch up is a free cad program that would give you experience in learning the cad operation.  Thanks again Tim.

Comment by Tim Holman on May 8, 2011 at 3:32pm

Jay, i can see why you like hickory wood.  this calico hickory is beautiful.

You did a great job on this hutch.  Do you use cad or just do like me, a rough hand drawing?  I would like to learn cad some day, i feel it could help reduce my mistakes.

Comment by Mike rignola on May 19, 2010 at 1:25pm
Very nice piece of work
Comment by Jay Boutwell on April 24, 2010 at 9:32pm
Jens Jensen, It has several coats of a satin gloss lacquer with a catalyst hardner in it. Leaves an almost velvet feel to the wood. I had previously built the customer, of whom this is built for, a complets set of kitchen cabinets as well as bath cabinets for their new home. The other cabinets were of a calico hickory with granite counter tops. Then they requested pine cabinets for the master bedroom and bath. These were also finished in the same fashion. The Hutch was an after thought that they had wanted for the family room located just off the kitchen and wanted something that would contrast with the kitchen cabinets. The granite on the cupboard matches the kitchen counter tops. Thanks for your interest. jay Salem Oregon
Comment by Jens Jensen on April 24, 2010 at 9:21pm
Good looking cupboard or hutch like we would call it Poly finish I hope
Comment by joseph on April 24, 2010 at 4:11pm
love the horse heads

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_