Kreg Owners' Community

All framing and floors, using Kreg Jig. 5 ft. X 10

Rating:
  • Currently 0/5 stars.

Views: 1961

Projects: "Ketza" Camper Teardrop style camper.
Favorite of 1 person
Location: Orlando, Florida

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Rod Lowell on July 21, 2015 at 4:30pm

Hello Mike, the web site to go to is:  tatt.com. 

Be carefully, teardrop ing is very addictive.  You will spend hours on the site and everyone is very

Helpfully. Good luck and let me know how you are doing.

Rod

Comment by Mike Atencio on July 21, 2015 at 12:58pm

Where did you get the plans for this and how hard was it to register and license?

Looks great. That would work o the back of my Mazda. Where did you get the trailer and what size is it to build on? I know Harbor Freight sells small utility trailers so I'm wondering if you used one of those. Thanks, Mike

Comment by Rod Lowell on July 7, 2011 at 11:22am

Hey John.  I measured as I went as all shells are different.  That being said, you can go to www.mikenchell.com and they have a ton of info and pictures of galleys on the forum. That is how I did mine as the folks there are very knowledgeable and helpful.  I would look through there and spend a lot of time and ask lots of questions.   Thanks for the complement.  You can also see more of my photos on that web site.  Have fun as these little camper are very addictive!

Rod

Comment by John Fulton on July 7, 2011 at 10:26am

Hey Rod, it looks great.  I have a Teardrop camper and I need to rework the galley.  Can you take some close-up pictures of yours and send them to me?  Any measurements would be helpful.

Thanks,

John

jfulton50@aol.com

http://jfulton50.smugmug.com

 

Comment by Rod Lowell on June 14, 2011 at 8:30pm
Thank you gentlemen for the kind words.  I love the building process, especially since it is my first.
Comment by Martin Abelon on June 14, 2011 at 11:43am
Very cool looking camper Rod.
Comment by Al Barale on June 13, 2011 at 7:09pm
How good does your camper look, you have done a top job building it Rod, I really like it.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_