Kreg Owners' Community

Shuffleboard table

9' shuffleboard table with 8' playing surface.

Box has common pine sideboards and the bottom (not seen) is plywood and mdf scrap.

Playing surface is 2 x 3/4 birch plywood with red mahogany stain. The surface is not attached yet - I may redo it b/c the stain is so dark, the scoring lines are hard to see.

Vinyl liner for the inside of the box. Glued using Weldwood contact cement.

Steel pipe for the legs. Go to Essential Hardware for best prices.

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Tito Comas on November 11, 2017 at 2:41pm
Hi Andy, I just have a few more questions about your table. How long are the legs? What width are the sides of the box? Thanks for your help.

Tito
Comment by Andy Wilson on October 19, 2017 at 10:31am

No plans - sorry - I really just kind of built it on the fly.

The playing surface is 3/4 in birch plywood - I took two sheets 16" wide by 8 ft long and glued them to create the 1 1/2 thick playing surface. I then used fiberglass filler to smooth the edges to paint black. 

I actually created a new playing surface later - the dark stain on this one was too dark to use number decals. I'll post a new pic. I used Edge Glued Finger Joint Pine Board from lowes - 8 ft with a thick glaze coat finish. The playing surface needs to be thicker than 1 1/2 inches so you may want to go with 3 boards thick.


The box - i just winged it - I made it 12 inches longer and 8 inches wider than the playing surface to give room for the pucks to land. The base of the box and sides are covered cheap vinyl from Walmart. I glued the vinyl to the bottom and sides using vinyl pieces that were about an inch larger than all of the boards so that the overhang could be tucked and trimmed - before building the box.

The legs are cast iron pipes spray painted with oil rubbed bronze rustoleum metal paint.

I bought the pucks and sliding dust on Amazon

More expensive tables have hardware underneath to slightly bow the playing surface to make it just very very slightly concave to keep the pucks on the surface more. I'm looking to do that eventually.

Comment by Tito Comas on October 19, 2017 at 9:48am

Hi Andy, I love your shuffleboard table!! Do you have any plans/drawings you can share with me as I would like to make one!! I live in Ottawa and am not familiar with Essential Hardware; where do you live?

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_