I am using 1 inch deck boards and I are going to edge join them. What length screws should be used? My literature covers 1/2, 3/4, and 1 1/2 inch material.
Tags:
Steve,
Which jig is it that you have? If you could let me know I would be able to better assist you.
KregCS said:
Steve,
Which jig is it that you have? If you could let me know I would be able to better assist you.
I believe I have the K4 jig and I requested having the handle in the front, that was an option. I had used a jig at work with the handle in the rear and I am really glad I chose the one I did..
Steve
Steve,
Is the material you are working with actually 1"? If so you will want to set the jig and the depth collar settings for 1" material and then use a 1 1/2" screw. If you have any other questions please let us know.
Thank you for that information. It is one inch material.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service