Kreg Owners' Community

Cherry Desk

All joints (except drawers) done with Kreg pocket hole jig

  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Mark McCulley on June 22, 2017 at 8:00am

Thanks Alex!  The top is cherry veneered plywood with a cherry edge.  Most of the desk is plywood except for the edge band, drawers/drawer fronts and the apron.

Comment by Mark McCulley on June 22, 2017 at 7:54am

Thank you Sandy Sanderson!  I don't have any plans.  I found a similar desk online, altered the style and assigned dimensions to fit my needs.  Some of the dimensions where modified or made up while building.  I am on vacation but can get you some dimensions when I return if you like.

Comment by Alex B. Hatt on June 21, 2017 at 10:44pm

Very nice work Mark. did you use a plywood for the top with a cherry hardwood edge? I like the dovetail drawer details, very nice. Definitely better then that store bought stuff these days.  

Comment by Sandy Sanderson on June 21, 2017 at 12:55pm
Care to share any dimensions or plans? Looks great!

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_