Kreg Owners' Community

Basement entertainment unit and build out

Basement entertainment unit and build out

I'm building out my basement (finally) and decided to fill a 16' wall with an entertainment unit.

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Roy Orosco on May 22, 2016 at 10:29pm

Post some more updates as you go. This is a very nice project.

Comment by Andy Wilson on May 20, 2016 at 11:11am

Yeah - the two end cabs are set in. I'm finding that the face frames and counter edging on that is a challenge - getting it all to line up. I may be pulling some of it off and attacking it a bit differently.

Comment by Roy Orosco on May 19, 2016 at 10:32pm

It's impressive. Looks like you have two different depths on the cabinets. That's a very nice touch. Gives that pop out feeling. 

Comment by Andy Wilson on May 19, 2016 at 10:12pm
3/4 MDF for all of the structure. 1/2 MDF for backing. 3/4 Birch plywood counter top. Finish grade pine for all of the facing.

I'm using the leftover birch to make a 1.5" thick 7' 8" shuffleboard table. Not sure if it will work .... we'll see.
Comment by Roy Orosco on May 19, 2016 at 9:58pm

Looks fantastic Andy. Are you using plywood or mdf for the project?

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_