Kreg Owners' Community

Ok, I have to admit, I have used the same clear bag over and over again for almost a year now, just dumping it into the trash cans when full, however, my trusted bag has sprung a hole.  Why am I not surprised that Harbor Freight doesn't sell the replacement clear bags?  I know quite a few folks have bought this machine, any idea where to get replacement bags?  I appreciate the help!!

Views: 2650

Reply to This

Replies to This Discussion

yes they have a fine management team there,I shop the Bellingham WA. store via internet.and have never had a bad experience with them
Good luck and glad to help.


justin waldron said:
Thanks again Jens, Grizzly is my favorite place anyway!

Jens Jensen said:
http://www.grizzly.com/products/1-1-2-HP-Dust-Collector-with-New-Im...

This is compatible to ours and it is a 19-1/2 inch bag which will do you right Check your ring and see.You can call Grizzley and they will be very happy to serve your needs
I will have to get the dimensions for you, but to be honest it's got to be close to the same dimensions as any of the other dust collectors I've looked at. I will measure the footprint and get back to you. It's a great machine!! Much like many of the other folks on here I used a coupon and got it for around $130!! Well worth it!!!

Joseph Murro said:
Justin,
Besides the bag problem, what are the dimensions of this dust collector? ( the specs on the site don't tell ) and how well is the machine working for you overall?
I am shopping for one and would like to know how much space it takes and if you think its a good collector for the price.
Thank you.
it's 33 inches wide, 22 inches deep and 75 inches tall with the bag.

Joseph Murro said:
Thank you Justin. Just the overall size so I can see where or if I can fit it in my shop. I might have to go smaller if its too big.




justin waldron said:
I will have to get the dimensions for you, but to be honest it's got to be close to the same dimensions as any of the other dust collectors I've looked at. I will measure the footprint and get back to you. It's a great machine!! Much like many of the other folks on here I used a coupon and got it for around $130!! Well worth it!!!

Joseph Murro said:
Justin,
Besides the bag problem, what are the dimensions of this dust collector? ( the specs on the site don't tell ) and how well is the machine working for you overall?
I am shopping for one and would like to know how much space it takes and if you think its a good collector for the price.
Thank you.

Not a problem at all!  Glad I could help!

Joseph Murro said:

Thank you very much Justin, much appreciated!

  I bought one on amazon it was a big horn 11765 20 inch and it works great, it is better quality.  I do not use clear bags and mine came with 2 cloth bags and you  need 2 of them.  I bought one, since my lower bag was OK.

 

I appreciate the insight, thanks!

Hal Schmidt said:

  I bought one on amazon it was a big horn 11765 20 inch and it works great, it is better quality.  I do not use clear bags and mine came with 2 cloth bags and you  need 2 of them.  I bought one, since my lower bag was OK.

 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_