Kreg Owners' Community

I don't have a Woodcraft or Rockler close by so I can't really go see for myself.  But do the router tables come with a lift included?  Or is that something I have to buy separately?

Views: 245

Reply to This

Replies to This Discussion

The table does not come with a lift; you can purchase the fence and lift separately

Generally not, as there are a variety of style lifts with various features,

from simple mechanisms to those with more elaborate features.

I'd suggest calling the respective sources and ask their CS rep, and inquire about which router tables they offer and what's included.

Router tables, when equipped a "lift", should be so stated and defined.

If your interested in obtaining a router table with lift, I'd suggest perusing the www,

and review the various models offered.

Compare prices and features.

Router tables and router lifts individually.

You may want to obtain a separate table and lift, that meets your needs.

Thanks....based on the pictures it didn't look like they came with one.  I already have an older Rockler Router Table with the smaller table and smaller plate before they went to the larger sizes.  The lift on this table works just fine.  Would this lift transfer over to the new table or no?  I use a 1/4" allen key to raise and lower the router motor

John,

I'd suggest calling Kreg CS---obtain the "plate size" (width, depth, thickness and corner radius).

Measure the opening in your present table---compare the dimensional size of the Kreg plate table top opening for a suitable fit.

NOTE: The fence is described as being included with the router table.

https://www.kregtool.com/store/c35/router-table-systems/p352/precis...

John Dinkeldein said:

>>>... I already have an older Rockler Router Table with the smaller table and smaller plate before they went to the larger sizes.  The lift on this table works just fine.  Would this lift transfer over to the new table or no?  I use a 1/4" allen key to raise and lower the router motor/p>

John,

BTW---when you purchase the Kreg router table,

you many want to equip it with a suitable enclosure, under the table, to collect the sawdust.

Ken, thanks for the suggestions.

Jon, for further specs, please contact Technical Support at 800-447-8638 or online.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_