Kreg Owners' Community

When is Kreg going to come out with a adaptor for the dust collection on the Kreg jigs that will connect to a shop vac or a dust collection system? I know there is some systems out there that will work with little work but I would rather spend my money with Kreg for a made to fit system. Make it versatile so it will fit all Kreg products. I just this is a must and a great money making product for Kreg. What are y'all's thoughts?

Views: 1198

Reply to This

Replies to This Discussion

Kregs adaptor accommodates a 1-1/4" vac hose.

My small shop vac is attached to my K4 jig. I used the pvc elbow so the hose is out of the way. I use a corded drill plugged into a box from Sears that will turn on the vac when the drill starts and stays on a few seconds after the drill stops.

http://kregjig.ning.com/photo/albums/jig-mount-with-storage

Completed

 I think kreg making a dust port adaptor for the kreg jig to go on a shop vac is a plus for the small shop guys or gals that have only a shop vac for taking care of saw dust and etc. I think that kreg is using its thinking cap to help the DIYer type and woodworking type hobbist in making that adaptor. I think it would be a win, win for both sides. Kreg and us woodworkers.

From the Manufacturer

Connect any standard 1-1/4-inch vacuum hose

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_