Kreg Owners' Community

Made this with the Kreg Jig HD. That's a gutter in the middle with a couple expanding drain plugs. Had some Valspar red paint leftover to match the theme of the yard.

Rating:
  • Currently 5/5 stars.

Views: 19601

Favorite of 14 people

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Ron lackage on February 22, 2016 at 10:22am
Richard, head on over to - Designconfidential.com, the plans are pretty cheap on there. ...... FREE !
Comment by richard hernandez on February 22, 2016 at 1:42am

How much for the p[ans?

Comment by richard hernandez on February 22, 2016 at 12:32am

Awesome design. Getting to be close to that time of year when you just want to sit outdoors and enjoy a cold one with friends. And this table would do it. Thanks.

Comment by Ron lackage on June 5, 2015 at 1:00am
Stacy, Designconfidential.com has the best instructions that I've found. I used the HD jig and those monster screws ! Just finished my 9th table today. Added 2 benches with the "X" legs. Just smaller X's of course. Trying to add a picture in comments of the benches but can't figure it out so I'll try to change my profile pic.
Comment by Stacy Carlsen Sr. on June 4, 2015 at 6:52pm

thats a good idea   where can i find the plains at..or can i get them from you..

Comment by james wilhelm on April 19, 2015 at 9:23pm

Would be nice and polite to give a good comment on a project , before asking for just the plans , where have the manners gone on this site ??????

Comment by Rodney B. Pettigrew on April 19, 2015 at 8:59pm

Can you post the plans for this picnic cooler table?

Comment by Ron lackage on August 4, 2014 at 12:59am
Yes Joe you're right. This was the first one I made. All of the tables are 100% cedar after this first one.
Comment by Joe Cyprowski on August 3, 2014 at 12:21pm

Great Idea..  but don't like the use of pressure treated wood near food.  pressure treated wood picnic tables were the big thing in the 80's & 90's but the chemicals used to treat the lumber were found to be hazardous if came in contact with food 

Comment by Tim Uebrick on July 19, 2013 at 7:34am
Great idea!

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_