Kreg Owners' Community

Raised Bed Garden

Took a lot of work but came out perfect! Kreg will like this - I used 828 HD screws to finish this project (that meant drill 828 screws too). I made fixtures & jigs to ease the repetitive construction. I know it's tall but that's to keep the rabbits out.

Mike

  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Mike Goetzke on May 31, 2015 at 9:26pm
I used a simple 2-D drawing program called DeltaCAD. I use it quite a bit. It allows you to print any scale required. If you look close I used a 1:1 scaled print to make one og the jigs. As you can imagine there was a lot of repetitive work. For the miter cuts I did these on my table saw and used my miter sled with stops to make sure all the cuts were the same. There were lots of pieces but planning the cuts and using jigs/stops/fixtures made quick work of them.

Mike
Comment by Jeffrey Chappell on May 31, 2015 at 7:49pm

love this. how did u determine what angles u need to make the round parts in the big boxes and for the center part 

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_