Kreg Owners' Community

After drilling countless pocket holes the past couple years My shoulder is getting worn out.

I'm going to have to take up donations for a kreg foreman lol

I'm most likely going to start a YouTube channel as well to help others out with ideas and builds as well as sketch up etc...

Kreg ... Your jig has served me well and honestly it brought back the excitement of woodworking for me a couple years ago and I have been going strong ever since.

Views: 336

Attachments:

Reply to This

Replies to This Discussion

I'd settle for a K5!  It came out shortly after I purchase the K4 Master System.  While working with a 24"x30" piece of 3/4 plywood, I thought that if they had one that you could work the clamp from the front, it would be perfect.

That's a good point - I feel the same way about the system i have - I wouldn't trade it to go back without one but a front adjustment would be really nice

Tim , good point on the k 5, if the foreman is not in the budget right now , that would be the way to go , until you can save enough to buy the foreman , have a good wood  working day , JIM !!

Tim Grace said:

I'd settle for a K5!  It came out shortly after I purchase the K4 Master System.  While working with a 24"x30" piece of 3/4 plywood, I thought that if they had one that you could work the clamp from the front, it would be perfect.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_