Kreg Owners' Community

I'm seriously thinking of getting the K4 jig and I'm wondering what is the exact length of the jig. I have a lot of other Kreg tools and I'm going to make a drawer for them and put the K4 on top.
Thanks

Views: 167

Reply to This

Replies to This Discussion

ED It Is 5 " high  , 3 1/2 ,wide and 11 " deep when all together, hope this helps , JIM !!!

Hi Ed.  Below are the specs you requested on the Kreg Jig K4:
Happy Building!
KregRep

Hi Ed , guess I need to get a new tape measure, as my measurements are a bit different , but took them with the jig all the way down in base !!!  Also sending you some pics. of how I mounted mine on a board , that can be clamped to the work bench, can put a 1 " x 12 " x 8 foot board in there and it hold,s  great for me, hope this also helps , have a good day , JIM !!!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_