I'm redoing a room in my house to accommodate a nursery for my grandson. I used the Ultimate Changing Table Plans on Ana White's site. First time doing drawers and they came out ok, but stick a little. I also pulled the ugly carpet and put down laminate flooring and added white molding & quarter round to make it pop. Still have quite a bit to do (floating shelving, chalk board, bed assembly, phew), but I better hurry because she is due any day now. Almost completely done using Kreg Jig.
Tags:
Comment
Very nice, I just made one from these same plans, but just went with her plans. I really lie the drawers.
Cheryl, nice square and straight cut,s and clamp good , JIM !!
Thank you Jim,
The drawers really gave me the blues, I always have a hard time getting things squared so they are a little off, but no one notices except me. Any tips? I still haven't built my laundry room cabinets yet and I want to make sure they are as square as can be.
Hi Cheryl, very nice looking changing table, really like the finish, well done !!! Looks like it is ready for the new grandson , all stocked up with supplies!! All so glad to see it made the featured photo section, lately there have not been many featured or even received a good comment !!!!! Again well done and thanks for sharing , JIM !!!!!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community